March Nano Brewery Pump - Stainless Steel (115V)

• Designed for Professional Breweries: Specifically crafted for the “Nano” brewery, perfect for small commercial brewing operations. • Robust Performance: With a powerful 17 GPM flow rate and a magnetic drive, you can throttle back flow without harming the motor. • Food - Grade Assurance: Uses food - grade materials wherever it contacts your beer, ensuring high - quality brewing. This reliable Nano Brewery Pump by March is ideal when the H315 series is too small, and you don't need an expensive, large - scale brewery pump. Remember, after each use, disassemble and clean the pump to prevent the impeller from seizing. Just remove the bolts from the pump head, separate the pump head from the pump, and then take apart the impeller shaft and impeller. Clean thoroughly and reassemble. Materials in Contact with Beer: - Housing: Stainless Steel - Impeller: Polysulfone - O - Ring: Buna N - Thrust Washers: Ceramic Statistics: - Motor Output: 1/8HP/0.94KW - Max Flow: 17 G.P.M at zero head - Max Head: 27 ft. at 1 GPM - Inlet: 1' FPT - Outlet: 1/2' MPT - Pressure: Max. internal pressure is 200 psi - Temperature Range: 250F/121C - Electrical Connection: 115V 50/60HZ. The pump comes with a three - foot cord without a plug attached.

This March Nano Brewery Pump is great for small commercial breweries where you need a reliable pump that's not overly large or expensive. It's for professional brewers who want to ensure high - quality beer production. The pump has a motor output of 1/8HP/0.94KW, a max flow of 17 G.P.M at zero head, and can handle a max head of 27 ft. at 1 GPM. It has an inlet of 1' FPT and an outlet of 1/2' MPT, with a max internal pressure of 200 psi. The temperature range it can handle is 250F/121C, and it runs on 115V 50/60HZ with a three - foot cord (no plug).